Daily Papers

Deploying learned robot manipulation policies in industrial settings requires rigorous pre-deployment validation, yet exhaustive testing across high-dimensional parameter spaces is intractable. We present ROBOGATE, a deployment risk management framework that combines physics-based simulation with a two-stage adaptive sampling strategy to efficiently discover failure boundaries in the operational parameter space. Stage 1 employs Latin Hypercube Sampling (LHS) across an 8-dimensional parameter space to establish a coarse failure landscape from 20,000 uniformly distributed experiments. Stage 2 applies boundary-focused sampling that concentrates 10,000 additional experiments in the 30-70% success rate transition zone, enabling precise failure boundary mapping. Using NVIDIA Isaac Sim with Newton physics, we evaluate a scripted pick-and-place controller on two robot embodiments -- Franka Panda (7-DOF) and UR5e (6-DOF) -- across 30,000 total experiments. Our logistic regression risk model achieves an AUC of 0.780 on the combined dataset (vs. 0.754 for Stage 1 alone), identifies a closed-form failure boundary equation, and reveals four universal danger zones affecting both robot platforms. We further demonstrate the framework on VLA (Vision-Language-Action) model evaluation, where Octo-Small achieves 0.0% success rate on 68 adversarial scenarios versus 100% for the scripted baseline -- a 100-point gap that underscores the challenge of deploying foundation models in industrial settings. ROBOGATE is open-source and runs on a single GPU workstation.

LLM-based multi-agent systems are increasingly deployed on long-horizon tasks, but a single decisive error is often accepted by downstream agents and cascades into trajectory-level failure. Existing work frames this as post-hoc failure attribution, diagnosing the responsible agent and step after the trajectory has ended. However, this paradigm forfeits any opportunity to intervene while trajectory is still unfolding. In this work, we introduce AgentForesight, a framework that reframes this problem as online auditing: at each step of an unfolding trajectory, an auditor observes only the current prefix and must either continue the run or alarm at the earliest decisive error, without access to future steps. To this end, we curate AFTraj-2K, a corpus of agentic trajectories across Coding, Math, and Agentic domains, in which safe trajectories are retained under a strict curation pipeline and unsafe trajectories are annotated at the step of their decisive error via consensus among multiple LLM judges. Built on that, we develop AgentForesight-7B, a compact online auditor trained with a coarse-to-fine reinforcement learning recipe that first equips it with a risk-anticipation prior at the failure boundary on adjacent safe/unsafe prefix pairs, then sharpens this prior into precise step-level localization under a three-axis reward jointly targeting the what, where, and who of an audit verdict. Across AFTraj-2K and an external Who\&When benchmark, AgentForesight-7B outperforms leading proprietary models, including GPT-4.1 and DeepSeek-V4-Pro, achieving up to +19.9% performance gain and 3times lower step localization error, opening the loop from post-hoc failures detection to enabling deployment-time intervention. Project page: https://zbox1005.github.io/agent-foresight/

The capability of LLM agents to function as the ``brain'' of a system fundamentally expands the scope of analysis beyond a standalone model. Consequently, safety is no longer only about input--output content alignment. It also concerns system behavior and real-world execution outcomes. However, the current literature is fragmented across attack types, applications, and benchmarks. This makes it hard to explain why failures such as prompt injection, tool misuse, and memory poisoning often share the same structural cause, and how they spread through an agent workflow. In this survey, we treat isolation as a first-class principle for LLM-agent system safety. By isolation, we refer to the separation of user inputs, tool access, execution channels, inter-agent communication, and environment-originated context. We organize the literature with a boundary-centric taxonomy of five boundaries: user-agent, agent-tool, agent-execution, agent-agent, and system-environment. This view helps identify where the loss of isolation first occurs, how compromise propagates across boundaries, and which defenses are most relevant at each interface. We also summarize cross-boundary failure paths, discuss open challenges, and outline a research agenda for isolation-by-construction in future agent systems.

Large language models (LLMs) can make scientific software easier to use. However, a general model does not automatically know which measurements a particular sensor can support, which algorithms are implemented in the current software, or which conclusions are justified by a computed result. These distinctions are especially important for low-channel electroencephalography (EEG), where sparse spatial coverage and variable signal quality make plausible but unsupported interpretations easy to produce. We present NeuraDock Agent, an open-source architecture that separates a deterministic local EEG engine from a hardware-aware language layer. The numerical engine parses recordings, performs quality control, executes reviewed spectral workflows, and writes machine-readable artifacts. The LLM receives only a compact, allowlisted summary and a versioned context pack. The context describes the seven-channel hardware, reviewed workflows, result fields, implementation boundaries, scientific limits, and reference cases. Raw EEG and dense per-sample arrays remain local We evaluate the system at three levels. First, 12 recordings produced identical structured results over ten numerical repetitions, and a complete Rest/Task run produced identical result, report, and figure hashes over three repetitions. Second, request-capture and failure-injection experiments confirmed the tested data boundary and preservation of local artifacts under HTTP, malformed-output, and connection failures. Third, a boundary-awareness benchmark tested 36 ordinary and adversarial questions under four context ablations and two LLMs, yielding 288 outputs.These results support hardware- and implementation-aware grounding as a practical mechanism for calibrating what an EEG agent accepts, qualifies, or refuses; they do not establish clinical validity or a validated absolute cognitive-load index.

Reward model (RM) plays a pivotal role in aligning large language model (LLM) with human preferences. As real-world applications increasingly involve long history trajectories, e.g., LLM agent, it becomes indispensable to evaluate whether a model's responses are not only high-quality but also grounded in and consistent with the provided context. Yet, current RMs remain confined to short-context settings and primarily focus on response-level attributes (e.g., safety or helpfulness), while largely neglecting the critical dimension of long context-response consistency. In this work, we introduce Long-RewardBench, a benchmark specifically designed for long-context RM evaluation, featuring both Pairwise Comparison and Best-of-N tasks. Our preliminary study reveals that even state-of-the-art generative RMs exhibit significant fragility in long-context scenarios, failing to maintain context-aware preference judgments. Motivated by the analysis of failure patterns observed in model outputs, we propose a general multi-stage training strategy that effectively scales arbitrary models into robust Long-context RMs (LongRMs). Experiments show that our approach not only substantially improves performance on long-context evaluation but also preserves strong short-context capability. Notably, our 8B LongRM outperforms much larger 70B-scale baselines and matches the performance of the proprietary Gemini 2.5 Pro model.

GPU training jobs fail often, roughly two in five on large production clusters, yet the operator typically learns of a failure only by reconnecting hours later. Experiment trackers require editing the training script and maintaining a cloud connection; the scheduler's mail hook delivers a single status line with no cause and no logs. GPUAlert is a command-line wrapper that monitors any training command at the process boundary, and with no change to that command, emails a structured notification on completion carrying a classified failure cause, durable logs, and output artifacts. The tool is organized around three reliability primitives: a pre-launch log guarantee that establishes the durable destination before the child process can crash, notifier isolation that makes the wrapper's exit code a pure function of the child's status regardless of whether the email succeeds, and a non-silent artifact budget that bounds attachment size without ever dropping output silently. We release a labelled corpus of 474 GPU training logs across 15 failure classes and a reproducible evaluation harness. On the twelve hardware-reproduced classes, the ordered-rule classifier reaches 0.997 macro-F1, against 0.830 for unordered keyword matching and 0.133 for exit-code inspection. Wrapper overhead is a constant approximately 3ms per job; the pre-launch guarantee preserves a log where a shell redirect yields nothing; and across all 15 failure modes the wrapper returns the child's exit code unchanged even when the SMTP relay is unreachable.

Large language models (LLMs) are being rapidly integrated into decision-support tools, automation workflows, and AI-enabled software systems. However, their behavior in production environments remains poorly understood, and their failure patterns differ fundamentally from those of traditional machine learning models. This paper presents a system-level taxonomy of fifteen hidden failure modes that arise in real-world LLM applications, including multi-step reasoning drift, latent inconsistency, context-boundary degradation, incorrect tool invocation, version drift, and cost-driven performance collapse. Using this taxonomy, we analyze the growing gap in evaluation and monitoring practices: existing benchmarks measure knowledge or reasoning but provide little insight into stability, reproducibility, drift, or workflow integration. We further examine the production challenges associated with deploying LLMs - including observability limitations, cost constraints, and update-induced regressions - and outline high-level design principles for building reliable, maintainable, and cost-aware LLM systems. Finally, we outline high-level design principles for building reliable, maintainable, and cost-aware LLM-based systems. By framing LLM reliability as a system-engineering problem rather than a purely model-centric one, this work provides an analytical foundation for future research on evaluation methodology, AI system robustness, and dependable LLM deployment.

Neural PDE solvers are increasingly used as learned surrogates for families of partial differential equations, where the key machine learning challenge is not only interpolation on a fixed benchmark distribution but generalization under structured shifts in coefficients, boundary conditions, discretization, and rollout horizon. Yet evaluation is still often dominated by in-distribution test error, making robustness difficult to assess. We introduce a standardized stress-testing framework for neural PDE solvers under deployment-relevant shift. We instantiate it on three representative architectures -- Fourier Neural Operators (FNOs), a DeepONet-style model, and convolutional neural operators (CNOs) -- across five qualitatively different PDE families: dispersive, elliptic, multi-scale fluid, financial, and chaotic systems. Across 750 trained models, we measure robustness using baseline-normalized degradation factors together with spectral and rollout diagnostics. The resulting comparisons reveal that strong in-distribution accuracy does not reliably predict robustness, and that failure patterns depend jointly on architecture and PDE family. Our results provide a clearer basis for evaluating robustness claims in neural PDE solvers and suggest that function-space generalization under structured shift should be treated as a first-class evaluation target.

Physics-informed neural networks (PINNs) leverage neural-networks to find the solutions of partial differential equation (PDE)-constrained optimization problems with initial conditions and boundary conditions as soft constraints. These soft constraints are often considered to be the sources of the complexity in the training phase of PINNs. Here, we demonstrate that the challenge of training (i) persists even when the boundary conditions are strictly enforced, and (ii) is closely related to the Kolmogorov n-width associated with problems demonstrating transport, convection, traveling waves, or moving fronts. Given this realization, we describe the mechanism underlying the training schemes such as those used in eXtended PINNs (XPINN), curriculum regularization, and sequence-to-sequence learning. For an important category of PDEs, i.e., governed by non-linear convection-diffusion equation, we propose reformulating PINNs on a Lagrangian frame of reference, i.e., LPINNs, as a PDE-informed solution. A parallel architecture with two branches is proposed. One branch solves for the state variables on the characteristics, and the second branch solves for the low-dimensional characteristics curves. The proposed architecture conforms to the causality innate to the convection, and leverages the direction of travel of the information in the domain. Finally, we demonstrate that the loss landscapes of LPINNs are less sensitive to the so-called "complexity" of the problems, compared to those in the traditional PINNs in the Eulerian framework.

This paper systematically diagnoses the training failure modes of Token-Choice sparse Mixture-of-Experts (MoE) on video Diffusion Transformers. Starting from a pretrained dense model of about 5 billion parameters, we convert it into an MoE architecture following three laws: routed experts exactly clone the original FFN weights, shared experts are initialized to zero for verification and then to extremely small non-zero noise for actual training, while only the gating networks start from random initialization. Experiments reveal a hierarchy of five failure modes: (1) linear routers suffer global soft saturation with complete expert homogenization; (2) MLP routers introduce selective deadlock, where roughly one-third of layers degenerate into a single-expert mode that cannot be prevented by increasing the auxiliary loss; (3) cross-attention routers exhibit preliminary self-recovery, yet about nine layers remain stubbornly deadlocked; (4) deadlocked layers display a U-shaped distribution, concentrated in shallow visual processing layers and deep semantic integration layers; (5) bfloat16 mixed precision causes tiny weight updates to be truncated to zero by hardware. Based on routing decision time series over 65 million tokens across 5,000 training steps, we propose the Functional Redundancy Hypothesis: deadlock is a rational waiting strategy before the shared expert matures within the gate-shared expert-routed expert triadic system. This hypothesis is supported by the theory of functional redundancy in systems biology. On the engineering side, we summarize the Three Laws of dense-to-MoE conversion and provide a complete solution for the bfloat16 precision trap. We calibrate the current capability boundary of the Token-Choice paradigm and outline a three-step evolutionary roadmap from visual unification to a world model.

As large language models (LLMs) evolve into autonomous agents that execute long-horizon workflows, invoking a high-capability model at every step becomes economically unsustainable. While model routing is effective for single-turn queries, agentic routing is a sequential, path-dependent problem: early mistakes compound, feedback is often at the end of the episode, and deployments often demand strict per-task spending limits. We propose Budget-Aware Agentic Routing, which selects between a cheap and an expensive model at each step to optimize the cost--success frontier and to operate under strict per-task budgets. We propose Boundary-Guided Training, which leverages two boundary policies (always-small vs.\ always-large) to build a difficulty taxonomy and to anchor learning under sparse rewards. Our approach warms start with boundary-guided SFT data synthesis via stratified sampling of cost-efficient trajectories, then applies Boundary-Guided Policy Optimization (BoPO), combining boundary-relative rewards with a reference-guided advantage to avoid degenerate cheap-failure solutions. Experiment results show that our method improves the efficiency frontier, matching strong routing baselines at substantially lower cost while demonstrating generalization to strict inference-time budget constraints. Overall, our work establishes a foundational framework for agentic routing, shifting the paradigm from static model selection to dynamic, budget-aware sequential decision-making.

Visual generators excel at rendering, but they confidently fabricate what they do not know. User requests are unbounded, evolving, and deeply long-tailed: new characters, trending entities, post-cutoff events, and more. This world-knowledge bottleneck is structural: generators are trained on fixed corpora, but the visual world is open-ended. We construct SearchGen-20K and SearchGen-Bench, with 20,839 prompts spanning twelve failure categories and twenty-two domains, paired with a pre-executed multimodal SearchGen-Corpus-1M to support offline, reproducible research. On SearchGen-Bench, frontier open generators score only 21 to 28 out of 100, a 40-point collapse invisible to existing benchmarks. The natural remedy is to employ search tools, enabling agentic visual generation. However, we find that naive search fails: it retrieves indiscriminately, injecting noise into prompts the generator already handles. We trace the root cause to a generator-specific, evolving knowledge boundary: the divide between what a generator can internalize through training and what must remain in external context. Although this boundary is hard to specify in advance, we show that it is discoverable through a teach-then-search co-training framework. Even a minimal version of this co-training recipe produces monotonic improvement, laying the foundation for recursive self-improvement in visual generation that can meet world-knowledge-grounded requests. We release the full dataset, co-training corpus, and search corpus as a replayable harness for tool-augmented, world-knowledge-grounded visual generation.

Long-horizon failure in world models is conventionally attributed to compounding error, a generic framing that does not distinguish what kind of error compounds. We propose a kinematic-vs-dynamic reframing: world models tend to imagine kinematically rather than dynamically. We operationalize this as the imagined Kinematic-Consistency Error, a per-step diagnostic that measures how far a rollout departs from a closed-form kinematic null, paired with a perturbation protocol that tests whether iKCE responds when physical conditions cross a regime boundary. We instantiate the diagnostic on a released DreamerV3 checkpoint trained on DMC walker-walk, where imagined iKCE runs roughly two orders of magnitude above that of matched real-physics rollouts. Across a friction sweep that crosses the gait-collapse boundary, the model's iKCE stays statistically flat even as the trained policy's reward collapses through the same range, providing the kinematic-not-dynamic signature. The diagnostic distinguishes kinematic from dynamic imagination at horizons longer than the embodiment's gait period.

Tool-using LLM agents can violate the very policies they are deployed to enforce while appearing to complete the task successfully. In policy-permissive environments, a tool may execute any well-formed call even when the corresponding state transition is forbidden by domain policy. The result is a silent wrong state (a booking cancelled, a passenger count changed, a claim acted on without verification) that neither the tool nor the agent's self-report exposes. We study this failure mode in the τ^2-bench airline domain. On a budget agent, 78% of observed failures are silent wrong-state failures with no tool error, and the aggregate failure rate is reproducible across disjoint seeds, not sampling noise. We then evaluate a lightweight intervention: deterministic, read-only pre-execution gates that inspect the proposed call and current state before allowing a write. A four-gate suite raises full-benchmark success from 29.6% to 42.0% on gpt-4o-mini (+12.4pp; paired task-level bootstrap P=0.0012), and the lift reproduces on a disjoint 15-seed set (+12.3pp; P=0.0008). The effect is concentrated where the gates fire: on the 26/50 firing tasks, success rises by +19.2pp, while movement on the 24 non-firing tasks does not exclude zero. Two negative controls (a self-enforcing retail domain and BFCL) bound the mechanism: gates help when tools are policy-permissive and add little where tools already self-enforce. As suggestive evidence, not a central claim, the same failure mode persists at the frontier: gpt-5.2 at default reasoning still attempts policy-violating writes, and the same suite improves success from 61.2% to 71.6% (+10.4pp; P=0.020; n=5, no replication). The contribution is a bounded evaluation and reliability result: deterministic gates do not guarantee task success, but they can deterministically prevent a known class of silent policy-violating writes at the action boundary.

Interactive long video generation requires prompt switching to introduce new subjects or events, while maintaining perceptual fidelity and coherent motion over extended horizons. Recent distilled streaming video diffusion models reuse a rolling KV cache for long-range generation, enabling prompt-switch interaction through re-cache at each switch. However, existing streaming methods still exhibit progressive quality degradation and weakened motion dynamics. We identify two failure modes specific to interactive streaming generation: (i) at each prompt switch, current cache maintenance cannot simultaneously retain KV-based semantic context and recent latent cues, resulting in weak boundary conditioning and reduced perceptual quality; and (ii) during distillation, unbounded time indexing induces a positional distribution shift from the pretrained backbone's bounded RoPE regime, weakening pretrained motion priors and long-horizon motion retention. To address these issues, we propose Anchor Forcing, a cache-centric framework with two designs. First, an anchor-guided re-cache mechanism stores KV states in anchor caches and warm-starts re-cache from these anchors at each prompt switch, reducing post-switch evidence loss and stabilizing perceptual quality. Second, a tri-region RoPE with region-specific reference origins, together with RoPE re-alignment distillation, reconciles unbounded streaming indices with the pretrained RoPE regime to better retain motion priors. Experiments on long videos show that our method improves perceptual quality and motion metrics over prior streaming baselines in interactive settings. Project page: https://github.com/vivoCameraResearch/Anchor-Forcing

Stateful personal agents increasingly maintain long-term user profiles, episodic memories, and reusable skills. This persistence turns conversational sycophancy into a state-writing failure: accepted user-centric claims can be committed as lasting preferences, background facts, or workflows and later reused after the original conversation is gone. We call this persistent sycophancy and introduce the Personal Agent Sycophancy Benchmark (PASB), a 1,600-task benchmark that traces whether a conversational claim is accepted, written into durable agent state, and reused in a later neutral query. Unlike prior benchmarks that provide pre-written memories, PASB evaluates real agents (Hermes-Agent and OpenClaw) that decide what to store. It isolates the write process by combining four scenario framings with four temporal delivery patterns and separating a five-turn persist stage from a cleared three-turn query stage, ensuring downstream effects arise only from durable state. Across twelve models, the commit boundary is the key inflection point: downstream failure increases from 45.0% in session-only episodes to 71.9% after commitment, a consistent increase of 27.0 percentage points. Committed claims exhibit three write-time patterns: status promotion, attribution removal, and scope broadening. These patterns become stronger under memory-like or procedural framing, repeated reinforcement, and even across domain boundaries. These results show that agent sycophancy is fundamentally a state-writing governance problem. Once user content is committed to durable memory, safety must govern what agents write, not only what they say. PASB identifies the write-time controls needed to gate risky commits while preserving the source, role, and scope of stored content beyond response-level mitigations.

In this work, we provide a thorough investigation of gist-based context compression methods to improve long-context processing in large language models. We focus on two key questions: (1) How well can these methods replace full attention models? and (2) What potential failure patterns arise due to compression? Through extensive experiments, we show that while gist-based compression can achieve near-lossless performance on tasks like retrieval-augmented generation and long-document QA, it faces challenges in tasks like synthetic recall. Furthermore, we identify three key failure patterns: lost by the boundary, lost if surprise, and lost along the way. To mitigate these issues, we propose two effective strategies: fine-grained autoencoding, which enhances the reconstruction of original token information, and segment-wise token importance estimation, which adjusts optimization based on token dependencies. Our work provides valuable insights into the understanding of gist token-based context compression and offers practical strategies for improving compression capabilities.

Despite the success of physics-informed neural networks (PINNs) in approximating partial differential equations (PDEs), PINNs can sometimes fail to converge to the correct solution in problems involving complicated PDEs. This is reflected in several recent studies on characterizing the "failure modes" of PINNs, although a thorough understanding of the connection between PINN failure modes and sampling strategies is missing. In this paper, we provide a novel perspective of failure modes of PINNs by hypothesizing that training PINNs relies on successful "propagation" of solution from initial and/or boundary condition points to interior points. We show that PINNs with poor sampling strategies can get stuck at trivial solutions if there are propagation failures, characterized by highly imbalanced PDE residual fields. To mitigate propagation failures, we propose a novel Retain-Resample-Release sampling (R3) algorithm that can incrementally accumulate collocation points in regions of high PDE residuals with little to no computational overhead. We provide an extension of R3 sampling to respect the principle of causality while solving time-dependent PDEs. We theoretically analyze the behavior of R3 sampling and empirically demonstrate its efficacy and efficiency in comparison with baselines on a variety of PDE problems.

LLM agents can commit durable effects from authority evidence that was valid earlier in execution: a DOM snapshot, approval epoch, version witness, branch token, or worker result. We study the commit boundary at which earlier authority evidence no longer authorizes a durable effect. We call this property commit-time authorization: a durable effect is authorized only if the witness that licensed its derived state remains fresh, causally prior, bound to the same effect, and eligible at commit time. We build a controlled-invalidation suite spanning browser, tool/API, and multi-agent workflows. The suite preserves the user goal and payload shape while invalidating the authority relation before durability. In the primary 54-task matrix, endpoint success remains high: 262/270 runs reach the visible result. Only 55/270 are authorized completions; among the 216 invalidating rows, 207 commit after the authorizing path has failed. All 54 clean controls remain authorized, and a separate 54-run authority-preserving check produces no unauthorized commits. We then evaluate mitigation families. Prompt caution and single-condition checks are insufficient because different hazards break different boundary conditions. Defenses work when they refresh, rebind, replan, or refuse at the durability boundary. CommitGuard, a fail-closed boundary monitor, blocks stale durable-effect attempts on protected commit surfaces when runtimes emit witness, dependency, binding, and eligibility signals. The result is a reporting and runtime-design lesson: endpoint success is a utility metric; authorized commit is a security property.

Despite the rapid development of safety alignment techniques for LLMs, defending against multi-turn jailbreaks is still a challenging task. In this paper, we conduct a comprehensive comparison, revealing that some existing defense methods can improve the robustness of LLMs against multi-turn jailbreaks but compromise usability, i.e., reducing general capabilities or causing the over-refusal problem. From the perspective of mechanism interpretability of LLMs, we discover that these methods fail to establish a boundary that exactly distinguishes safe and harmful feature representations. Therefore, boundary-safe representations close to harmful representations are inevitably disrupted, leading to a decline in usability. To address this issue, we propose X-Boundary to push harmful representations away from boundary-safe representations and obtain an exact distinction boundary. In this way, harmful representations can be precisely erased without disrupting safe ones. Experimental results show that X-Boundary achieves state-of-the-art defense performance against multi-turn jailbreaks, while reducing the over-refusal rate by about 20% and maintaining nearly complete general capability. Furthermore, we theoretically prove and empirically verify that X-Boundary can accelerate the convergence process during training. Please see our code at: https://github.com/AI45Lab/X-Boundary.

Large Language Models used in ChatGPT have traditionally been trained to learn a refusal boundary: depending on the user's intent, the model is taught to either fully comply or outright refuse. While this is a strong mitigation for explicitly malicious prompts, focusing safety training on refusals can lead to brittleness for prompts with obscured user intent. Binary refusal boundaries are especially ill-suited for dual-use cases (such as biology or cybersecurity), where a user request can be answered safely at a high level, but in some cases can lead to malicious uplift if sufficiently detailed or actionable. As an alternative, we propose safe-completions: a safety-training approach that centers on the safety of the assistant's output, rather than a binary classification of the user's intent. Safe-completions seek to maximize helpfulness within the safety policy's constraints. We incorporated this approach into GPT-5 and find that across both production comparisons and internally controlled experiments, safe-completion training improves safety (especially on dual-use prompts), reduces the severity of residual safety failures, and substantially increases model helpfulness.

Under standard graphical assumptions, the Markov boundary of a target variable is the smallest set of features that renders every other feature redundant. Once the boundary is observed, the target is conditionally independent of the rest of the table. This is a tempting object for tabular prediction, since it names exactly the columns a model should need. Yet modern regressors are still trained on the full feature set. We ask whether the Markov boundary is genuinely useful for prediction on SCM3K, a 3,450-task synthetic SCM benchmark with feature counts from 40 to 1000 and six SCM families, evaluated with six regressors. The answer is more nuanced than the theory suggests. Restricting a regressor to the oracle boundary often improves prediction substantially, and the improvement grows as the feature space becomes larger and sparser. But the natural pipeline of recovering the boundary with causal discovery and training on the recovered mask does not deliver. Existing estimators exhaust the compute budget before reaching the regime where the boundary helps most, and even where they run they rarely beat the full feature set. We trace this to three causes. Discovery optimizes structural recovery rather than prediction. False negatives and false positives carry sharply asymmetric predictive cost. The exact boundary is only one of many feature sets that beat all features. We then develop what these facts imply for prediction-aligned feature selection and for tabular models that learn to use causal structure.

Self-improving AI agents are designed to learn from their mistakes. We show they can also hallucinate mistakes that never happened. We study this failure mode in automated harness optimization, where an LLM-based proposer edits an agent's scaffold, including prompts, parsers, filters, validators and guardrails, to eliminate observed failures. But this process rarely asks first: was there a real failure to fix? We introduce the Counterfactual Fabrication Lab, a deterministic micro-lab where the correct action is known: do nothing. The lab plants a candidate guardrail for a failure class that provably never occurs, presents only legal episodes, and uses a byte-exact oracle to check every cited violation. The proposer behaves as expected on real violations and abstains on featureless legal input. Yet when the legal input contains a harmless pattern resembling a familiar game rule, it invents a failure: in 15/60 runs, versus 0/60 on featureless input, it enables the nonexistent-rule guardrail and cites a violation the oracle refutes. The effect is structured, not indiscriminate. In single-shot proposals it appears only when three conditions coincide: a rule-shaped pattern, an open-ended rule set and an instruction that presupposes failures. Removing any of these conditions eliminates the fabrication. Because the invented guardrail changes no true outcome and cannot improve an already-perfect suppression score, the phenomenon is neither reward hacking nor over-refusal. It is a phantom guardrail: a fix for a failure that never happened, invisible to suppression-only acceptance. Inside an add-only accept loop it re-enters even without the failure-presupposing instruction, the loop's keep-adding role supplying the demand the instruction supplied in single shot, and once in it stays. We present the Counterfactual Fabrication Lab for measuring fabricated failures in self-improving agent harnesses.

Safety alignment in Large Language Models is critical for healthcare; however, reliance on binary refusal boundaries often results in over-refusal of benign queries or unsafe compliance with harmful ones. While existing benchmarks measure these extremes, they fail to evaluate Safe Completion: the model's ability to maximise helpfulness on dual-use or borderline queries by providing safe, high-level guidance without crossing into actionable harm. We introduce Health-ORSC-Bench, the first large-scale benchmark designed to systematically measure Over-Refusal and Safe Completion quality in healthcare. Comprising 31,920 benign boundary prompts across seven health categories (e.g., self-harm, medical misinformation), our framework uses an automated pipeline with human validation to test models at varying levels of intent ambiguity. We evaluate 30 state-of-the-art LLMs, including GPT-5 and Claude-4, revealing a significant tension: safety-optimised models frequently refuse up to 80\% of "Hard" benign prompts, while domain-specific models often sacrifice safety for utility. Our findings demonstrate that model family and size significantly influence calibration: larger frontier models (e.g., GPT-5, Llama-4) exhibit "safety-pessimism" and higher over-refusal than smaller or MoE-based counterparts (e.g., Qwen-3-Next), highlighting that current LLMs struggle to balance refusal and compliance. Health-ORSC-Bench provides a rigorous standard for calibrating the next generation of medical AI assistants toward nuanced, safe, and helpful completions. The code and data will be released upon acceptance. red{Warning: Some contents may include toxic or undesired contents.}

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

Hypernetwork-based methods such as Doc-to-LoRA internalize a document into an LLM's weights in a single forward pass, but they fail systematically on conflicts: when the document contradicts pretraining knowledge, accuracy collapses to 46.4% on the deepest facts. We show the failure is a magnitude problem rather than a representational one. The hypernetwork already targets the right layers, but its adapter margin is approximately constant across documents while the pretrained margin grows with training frequency, so deep conflicts lose by construction. The account predicts that failure should track prior strength: sorting 194 conflicts by the base model's log-probability on the contradicted fact, baseline accuracy falls from 68% on weak-prior questions to 16% on strong-prior ones, a 52 percentage-point gap. The cure is amplitude. Selective Layer Boosting scales the adapter at its top-norm layers, and Conflict-Aware Internalization triggers boosting only when the base model is confident. Both are training-free; together they raise deep-conflict accuracy from 46.4% to 71.0% on Gemma-2B and from 53.6% to 72.5% on Mistral-7B while preserving novel-knowledge recall, and beat vanilla retrieval-augmented generation on medium conflicts by 18 percentage points despite operating entirely in parameter space. We release KID-Bench, a 489-question benchmark that separates novel recall, cross-knowledge combination, and prior-graded conflicts.

The abundance of data has given machine learning considerable momentum in natural sciences and engineering, though modeling of physical processes is often difficult. A particularly tough problem is the efficient representation of geometric boundaries. Triangularized geometric boundaries are well understood and ubiquitous in engineering applications. However, it is notoriously difficult to integrate them into machine learning approaches due to their heterogeneity with respect to size and orientation. In this work, we introduce an effective theory to model particle-boundary interactions, which leads to our new Boundary Graph Neural Networks (BGNNs) that dynamically modify graph structures to obey boundary conditions. The new BGNNs are tested on complex 3D granular flow processes of hoppers, rotating drums and mixers, which are all standard components of modern industrial machinery but still have complicated geometry. BGNNs are evaluated in terms of computational efficiency as well as prediction accuracy of particle flows and mixing entropies. BGNNs are able to accurately reproduce 3D granular flows within simulation uncertainties over hundreds of thousands of simulation timesteps. Most notably, in our experiments, particles stay within the geometric objects without using handcrafted conditions or restrictions.

Large language models are increasingly deployed as *deep agents* that plan, maintain persistent state, and invoke external tools, shifting safety failures from unsafe text to unsafe *trajectories*. We introduce **AgentFence**, an architecture-centric security evaluation that defines 14 trust-boundary attack classes spanning planning, memory, retrieval, tool use, and delegation, and detects failures via *trace-auditable conversation breaks* (unauthorized or unsafe tool use, wrong-principal actions, state/objective integrity violations, and attack-linked deviations). Holding the base model fixed, we evaluate eight agent archetypes under persistent multi-turn interaction and observe substantial architectural variation in mean security break rate (MSBR), ranging from 0.29 pm 0.04 (LangGraph) to 0.51 pm 0.07 (AutoGPT). The highest-risk classes are operational: Denial-of-Wallet (0.62 pm 0.08), Authorization Confusion (0.54 pm 0.10), Retrieval Poisoning (0.47 pm 0.09), and Planning Manipulation (0.44 pm 0.11), while prompt-centric classes remain below 0.20 under standard settings. Breaks are dominated by boundary violations (SIV 31%, WPA 27%, UTI+UTA 24%, ATD 18%), and authorization confusion correlates with objective and tool hijacking (ρapprox 0.63 and ρapprox 0.58). AgentFence reframes agent security around what matters operationally: whether an agent stays within its goal and authority envelope over time.

AI agents often fail in ways that are difficult to localize because executions are probabilistic, long-horizon, multi-agent, and mediated by noisy tool outputs. We address this gap by manually annotating failed agent runs and release a novel benchmark of 115 failed trajectories spanning structured API workflows, incident management, and open-ended web/file tasks. Each trajectory is annotated with a critical failure step and a category from a grounded-theory derived, cross-domain failure taxonomy. To mitigate the human cost of failure attribution, we present AGENTRX, an automated domain-agnostic diagnostic framework that pinpoints the critical failure step in a failed agent trajectory. It synthesizes constraints, evaluates them step-by-step, and produces an auditable validation log of constraint violations with associated evidence; an LLM-based judge uses this log to localize the critical step and category. Our framework improves step localization and failure attribution over existing baselines across three domains.

Austenitic 347H stainless steel offers superior mechanical properties and corrosion resistance required for extreme operating conditions such as high temperature. The change in microstructure due to composition and process variations is expected to impact material properties. Identifying microstructural features such as grain boundaries thus becomes an important task in the process-microstructure-properties loop. Applying convolutional neural network (CNN) based deep-learning models is a powerful technique to detect features from material micrographs in an automated manner. Manual labeling of the images for the segmentation task poses a major bottleneck for generating training data and labels in a reliable and reproducible way within a reasonable timeframe. In this study, we attempt to overcome such limitations by utilizing multi-modal microscopy to generate labels directly instead of manual labeling. We combine scanning electron microscopy (SEM) images of 347H stainless steel as training data and electron backscatter diffraction (EBSD) micrographs as pixel-wise labels for grain boundary detection as a semantic segmentation task. We demonstrate that despite producing instrumentation drift during data collection between two modes of microscopy, this method performs comparably to similar segmentation tasks that used manual labeling. Additionally, we find that naïve pixel-wise segmentation results in small gaps and missing boundaries in the predicted grain boundary map. By incorporating topological information during model training, the connectivity of the grain boundary network and segmentation performance is improved. Finally, our approach is validated by accurate computation on downstream tasks of predicting the underlying grain morphology distributions which are the ultimate quantities of interest for microstructural characterization.

For deploying foundation models, practitioners increasingly need prescriptive scaling laws: given a pre training compute budget, what downstream accuracy is attainable with contemporary post training practice, and how stable is that mapping as the field evolves? Using large scale observational evaluations with 5k observational and 2k newly sampled data on model performance, we estimate capability boundaries, high conditional quantiles of benchmark scores as a function of log pre training FLOPs, via smoothed quantile regression with a monotone, saturating sigmoid parameterization. We validate the temporal reliability by fitting on earlier model generations and evaluating on later releases. Across various tasks, the estimated boundaries are mostly stable, with the exception of math reasoning that exhibits a consistently advancing boundary over time. We then extend our approach to analyze task dependent saturation and to probe contamination related shifts on math reasoning tasks. Finally, we introduce an efficient algorithm that recovers near full data frontiers using roughly 20% of evaluation budget. Together, our work releases the Proteus 2k, the latest model performance evaluation dataset, and introduces a practical methodology for translating compute budgets into reliable performance expectations and for monitoring when capability boundaries shift across time.

Recent advancements in quality control across various industries have increasingly utilized the integration of video cameras and image processing for effective defect detection. A critical barrier to progress is the scarcity of comprehensive datasets featuring annotated defects, which are essential for developing and refining automated defect detection models. This systematic review, spanning from 2015 to 2023, identifies 15 publicly available datasets and critically examines them to assess their effectiveness and applicability for benchmarking and model development. Our findings reveal a diverse landscape of datasets, such as NEU-CLS, NEU-DET, DAGM, KolektorSDD, PCB Defect Dataset, and the Hollow Cylindrical Defect Detection Dataset, each with unique strengths and limitations in terms of image quality, defect type representation, and real-world applicability. The goal of this systematic review is to consolidate these datasets in a single location, providing researchers who seek such publicly available resources with a comprehensive reference.

Proactive interventions by LLM critic models are often assumed to improve reliability, yet their effects at deployment time are poorly understood. We show that a binary LLM critic with strong offline accuracy (AUROC 0.94) can nevertheless cause severe performance degradation, inducing a 26 percentage point (pp) collapse on one model while affecting another by near zero pp. This variability demonstrates that LLM critic accuracy alone is insufficient to determine whether intervention is safe. We identify a disruption-recovery tradeoff: interventions may recover failing trajectories but also disrupt trajectories that would have succeeded. Based on this insight, we propose a pre-deployment test that uses a small pilot of 50 tasks to estimate whether intervention is likely to help or harm, without requiring full deployment. Across benchmarks, the test correctly anticipates outcomes: intervention degrades performance on high-success tasks (0 to -26 pp), while yielding a modest improvement on the high-failure ALFWorld benchmark (+2.8 pp, p=0.014). The primary value of our framework is therefore identifying when not to intervene, preventing severe regressions before deployment.

Imitation learning (IL) with generative models, such as diffusion and flow matching, has enabled robots to perform complex, long-horizon tasks. However, distribution shifts from unseen environments or compounding action errors can still cause unpredictable and unsafe behavior, leading to task failure. Early failure prediction during runtime is therefore essential for deploying robots in human-centered and safety-critical environments. We propose FIPER, a general framework for Failure Prediction at Runtime for generative IL policies that does not require failure data. FIPER identifies two key indicators of impending failure: (i) out-of-distribution (OOD) observations detected via random network distillation in the policy's embedding space, and (ii) high uncertainty in generated actions measured by a novel action-chunk entropy score. Both failure prediction scores are calibrated using a small set of successful rollouts via conformal prediction. A failure alarm is triggered when both indicators, aggregated over short time windows, exceed their thresholds. We evaluate FIPER across five simulation and real-world environments involving diverse failure modes. Our results demonstrate that FIPER better distinguishes actual failures from benign OOD situations and predicts failures more accurately and earlier than existing methods. We thus consider this work an important step towards more interpretable and safer generative robot policies. Code, data and videos are available at https://tum-lsy.github.io/fiper_website.

We have systematically investigated the grain boundary (GB) angle dependence of transport properties for NdFeAs(O,F) fabricated on [001]-tilt symmetric MgO bicrystal substrates. In our previous study, NdFeAs(O,F) bicrystal films showed a weak-link behaviour even at a GB angle of 6°. However, this was caused by an extrinsic effect originating from the damage to both NdFeAs(O,F) and MgO substrate by excess F-diffusion along the grain boundary. To investigate the intrinsic nature of grain boundaries, we minimized the damage to NdFeAs(O,F) and MgO by reducing the deposition temperature of NdOF over-layer needed for F-doping. The resultant NdFeAs(O,F) bicrystal films have a critical angle of 8.5°, above which Jc starts to decrease exponentially. This critical angle is almost the same as those of other Fe-based superconductors.

Anomaly detection aims at detecting unexpected behaviours in the data. Because anomaly detection is usually an unsupervised task, traditional anomaly detectors learn a decision boundary by employing heuristics based on intuitions, which are hard to verify in practice. This introduces some uncertainty, especially close to the decision boundary, that may reduce the user trust in the detector's predictions. A way to combat this is by allowing the detector to reject examples with high uncertainty (Learning to Reject). This requires employing a confidence metric that captures the distance to the decision boundary and setting a rejection threshold to reject low-confidence predictions. However, selecting a proper metric and setting the rejection threshold without labels are challenging tasks. In this paper, we solve these challenges by setting a constant rejection threshold on the stability metric computed by ExCeeD. Our insight relies on a theoretical analysis of such a metric. Moreover, setting a constant threshold results in strong guarantees: we estimate the test rejection rate, and derive a theoretical upper bound for both the rejection rate and the expected prediction cost. Experimentally, we show that our method outperforms some metric-based methods.

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

As modern microservice systems grow increasingly popular and complex-often consisting of hundreds or even thousands of fine-grained, interdependent components-they are becoming more susceptible to frequent and subtle failures. Ensuring system reliability therefore hinges on accurate and efficient failure localization. Traditional failure localization approaches based on small models lack the flexibility to adapt to diverse failure scenarios, while recent LLM-based methods suffer from two major limitations: they often rely on rigid invocation workflows that constrain the model's ability to dynamically explore optimal localization paths, and they require resource-intensive inference, making them cost-prohibitive for real-world deployment. To address these challenges, we explore the use of reinforcement fine-tuning to equip lightweight LLMs with reasoning and self-refinement capabilities, significantly improving the cost-effectiveness and adaptability of LLM-based failure localization. We begin with an empirical study to identify three key capabilities essential for accurate localization. Building on these insights, we propose a progressive multi-stage GRPO fine-tuning framework, which integrates a multi-factor failure localization grader and a recursion-of-thought actor module. The resulting model, ThinkFL, not only outperforms existing state-of-the-art LLMs and baseline methods in localization accuracy but also reduces end-to-end localization latency from minutes to seconds, demonstrating strong potential for real-world applications.

Domain expertise enhances judgment within boundaries but creates systematic vulnerabilities specifically at borders. We term this Transitive Expert Error (TEE), distinct from Dunning-Kruger effects, requiring calibrated expertise as precondition. Mechanisms enabling reliable within-domain judgment become liabilities when structural similarity masks causal divergence. Two core mechanisms operate: structural similarity bias causes experts to overweight surface features (shared vocabulary, patterns, formal structure) while missing causal architecture differences; authority persistence maintains confidence across competence boundaries through social reinforcement and metacognitive failures (experts experience no subjective uncertainty as pattern recognition operates smoothly on familiar-seeming inputs.) These mechanism intensify under three conditions: shared vocabulary masking divergent processes, social pressure for immediate judgment, and delayed feedback. These findings extend to AI routing architectures (MoE systems, multi-model orchestration, tool-using agents, RAG systems) exhibiting routing-induced failures (wrong specialist selected) and coverage-induced failures (no appropriate specialist exists). Both produce a hallucination phenotype: confident, coherent, structurally plausible but causally incorrect outputs at domain boundaries. In human systems where mechanisms are cognitive black boxes; AI architectures make them explicit and addressable. We propose interventions: multi-expert activation with disagreement detection (router level), boundary-aware calibration (specialist level), and coverage gap detection (training level). TEE has detectable signatures (routing patterns, confidence-accuracy dissociations, domain-inappropriate content) enabling monitoring and mitigation. What remains intractable in human cognition becomes addressable through architectural design.

Web-agent benchmarks overwhelmingly measure depth -- pinning one obscure answer behind a chain of constraints -- while breadth, exhaustively enumerating a closed set and filling each item's attributes, is barely evaluated, especially outside English. Breadth is also hard to build: certifying that a gold set is complete and every cell correct is far costlier than checking a single answer. I introduce Ko-WideSearch, a Korean breadth-search benchmark built by an automated synthesize-and-verify pipeline. Each task names a set-parent entity -- a TV season, a dynasty, a league, an administrative region, an election -- and asks for its full membership plus a per-item attribute table, graded by Item-, Column-, and Row-F1. It spans 228 tables over 190 entities and sixteen categories across three difficulty tiers, set by two structural knobs I dial independently -- table width and a 2-D composite key -- so cross-product membership climbs from 0\% to 100\% across the tiers. A single normalization-aware comparator is shared between gold construction and grading, so stable date and count columns are not over-dropped on formatting alone. Across twenty web agents, the failure is consistent: agents recover the set but not the rows (e.g.\ Item-F1 92.8 against Row-F1 53.7), accuracy falls steadily as the knobs harden, and neither more search nor more spend closes the gap. Broken down by cell, the hard part is finding the right value, not formatting it: open-ended free-text cells fail most, while cells with a standard answer such as a date or a name usually come out right.

We identify a structural weakness in current large language model (LLM) alignment: modern refusal mechanisms are fail-open. While existing approaches encode refusal behaviors across multiple latent features, suppressing a single dominant feature-via prompt-based jailbreaks-can cause alignment to collapse, leading to unsafe generation. Motivated by this, we propose fail-closed alignment as a design principle for robust LLM safety: refusal mechanisms should remain effective even under partial failures via redundant, independent causal pathways. We present a concrete instantiation of this principle: a progressive alignment framework that iteratively identifies and ablates previously learned refusal directions, forcing the model to reconstruct safety along new, independent subspaces. Across four jailbreak attacks, we achieve the strongest overall robustness while mitigating over-refusal and preserving generation quality, with small computational overhead. Our mechanistic analyses confirm that models trained with our method encode multiple, causally independent refusal directions that prompt-based jailbreaks cannot suppress simultaneously, providing empirical support for fail-closed alignment as a principled foundation for robust LLM safety.

Vision-Language-Action (VLA) models enable robots to follow natural language instructions and generalize across diverse tasks, but they remain vulnerable to execution failures that compromise reliability in real-world deployment. Detecting such failures during execution is therefore critical for the robust deployment of embodied systems. Existing failure detection methods either rely on expensive action resampling or external models, while alternatives propagate trajectory-level labels uniformly across every timestep, obscuring localized failure signals. In this paper, we propose Hide-and-Seek, a framework that formulates VLA failure detection as a coarsely supervised learning problem. By combining inter-trajectory and intra-trajectory contrastive objectives, Hide-and-Seek localizes failure-indicative actions and induces temporally structured failure signals from trajectory-level supervision alone, without any step-level annotation. We evaluate Hide-and-Seek on LIBERO, VLABench, and a real-world robotic platform across three representative VLA policies: OpenVLA, π_0, and π_{0.5}.Our method achieves state-of-the-art multi-task failure detection performance with a practical accuracy--timeliness trade-off under conformal prediction, and generalizes well to both seen and unseen tasks.

Monitoring complex industrial assets relies on engineer-authored symbolic rules that trigger based on sensor conditions and prompt technicians to perform corrective actions. The bottleneck is not detection but response: translating rules into maintenance steps requires asset-specific knowledge gained through years of practice. We investigate whether LLMs can serve as decision support for this rule-to-action step and introduce , a benchmark of 6{,}690 expert-validated multiple-choice questions from 118 rule-action pairs across 16 asset types. We contribute (i) a symbolic-to-MCQA pipeline normalizing rules to Disjunctive Normal Form with embedding-based distractor sampling, (ii) five variants probing distinct failure modes (Pro, Pert, Verbose, Aug, Rationale), and (iii) a benchmark of 29 LLMs and 4 embedding baselines. A human evaluation (9 practitioners, mean 45.0\%) confirms requires specialist knowledge beyond operational experience. Three findings stand out. The frontier has closed: the top three LLMs lie within one Macro point, with Bradley-Terry Elo placing claude-opus-4-6 30 points above the next model. Yet \,Pro exposes brittleness, with every model losing 13--60\% relative accuracy under distractor expansion. \,Aug exposes pattern-matching: under condition inversion, frontier models still select the original answer 49--63\% of the time. The deployment bottleneck is not capability but calibration: frontier models handle template-style fault detection but break under structural perturbation.

The boundary representation (B-Rep) is the standard data structure used in Computer-Aided Design (CAD) for defining solid models. Despite recent progress, directly generating B-Reps end-to-end with precise geometry and watertight topology remains a challenge. This paper presents AutoBrep, a novel Transformer model that autoregressively generates B-Reps with high quality and validity. AutoBrep employs a unified tokenization scheme that encodes both geometric and topological characteristics of a B-Rep model as a sequence of discrete tokens. Geometric primitives (i.e., surfaces and curves) are encoded as latent geometry tokens, and their structural relationships are defined as special topological reference tokens. Sequence order in AutoBrep naturally follows a breadth first traversal of the B-Rep face adjacency graph. At inference time, neighboring faces and edges along with their topological structure are progressively generated. Extensive experiments demonstrate the advantages of our unified representation when coupled with next-token prediction for B-Rep generation. AutoBrep outperforms baselines with better quality and watertightness. It is also highly scalable to complex solids with good fidelity and inference speed. We further show that autocompleting B-Reps is natively supported through our unified tokenization, enabling user-controllable CAD generation with minimal changes. Code is available at https://github.com/AutodeskAILab/AutoBrep.

Multi-turn tool-use RL is bottlenecked by the rapid depletion of informative samples in static datasets. We observe that the gradient signal in GRPO concentrates on tasks with the highest rollout reward variance, a consequence of the Popoviciu upper bound. Consequently, samples near the agent's capability boundary -- where successes and failures are roughly balanced -- contribute disproportionately large policy gradients. As training progresses, this boundary continuously shifts, which gradually depletes the pool of informative samples in a static dataset. We propose RODS (Reward-driven Online Data Synthesis) to resolve this depletion. RODS closes the loop between RL training and data generation by repurposing the progress reward variance as a practical, zero-cost boundary detector that requires no extra inference beyond the rollouts already computed for training. It continuously identifies such boundary samples, synthesizes new multi-turn variants matching their structural complexity (e.g., API topology and dependency depth) via a skill-aligned resampling pipeline, and manages a dynamic replay buffer that co-evolves with the policy. Starting from 400 human seeds and maintaining an active training pool of ~800 samples, RODS achieves comparable performance to a 17K-sample offline pipeline while requiring roughly 20x fewer trajectories, and improves over fixed-data RL and environment augmentation in our controlled setting.

Long-horizon LLM agents can fail quietly: they settle on one reading of the evidence early, then spend the rest of the run defending it. We call this premature commitment. Final-answer scoring misses the failure mode because it sees only the answer, not whether the process has already collapsed to a stable path. We define representational commitment as cross-run hidden-state convergence at a fixed reasoning step, and use it as an early diagnostic of trajectory consistency. On Llama-3.1-70B running ReAct on HotpotQA, step-4 hidden-state similarity predicts downstream behavioral consistency (r = -0.35, partial r = -0.45), with a localized temporal and layer-wise signature. The signal replicates across Qwen-2.5-72B and Phi-3-14B, and on StrategyQA (r = -0.83). It does not track correctness: committed-wrong and committed-correct questions are not separable in activation similarity. That boundary is central to the claim. Commitment tells us whether an agent has settled, not whether it is right. A runtime monitor detects inconsistent trajectories from hidden states at AUROC up to 0.97 (0.85--0.88 under a stricter split), and a prompting intervention cuts behavioral variance by 28% against a token-matched control while leaving accuracy statistically unchanged. We also test whether the signal can route self-consistency compute; on a harder benchmark it helps only modestly and is matched by a simpler output-based baseline. The result is a diagnostic for a hidden process failure, with clear limits rather than a general accuracy lever.

This work identifies a critical failure mode in frontier large language models (LLMs), which we term Internal Safety Collapse (ISC): under certain task conditions, models enter a state in which they continuously generate harmful content while executing otherwise benign tasks. We introduce TVD (Task, Validator, Data), a framework that triggers ISC through domain tasks where generating harmful content is the only valid completion, and construct ISC-Bench containing 53 scenarios across 8 professional disciplines. Evaluated on JailbreakBench, three representative scenarios yield worst-case safety failure rates averaging 95.3% across four frontier LLMs (including GPT-5.2 and Claude Sonnet 4.5), substantially exceeding standard jailbreak attacks. Frontier models are more vulnerable than earlier LLMs: the very capabilities that enable complex task execution become liabilities when tasks intrinsically involve harmful content. This reveals a growing attack surface: almost every professional domain uses tools that process sensitive data, and each new dual-use tool automatically expands this vulnerability--even without any deliberate attack. Despite substantial alignment efforts, frontier LLMs retain inherently unsafe internal capabilities: alignment reshapes observable outputs but does not eliminate the underlying risk profile. These findings underscore the need for caution when deploying LLMs in high-stakes settings. Source code: https://github.com/wuyoscar/ISC-Bench

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

Reliable application of machine learning is of primary importance to the practical deployment of deep learning methods. A fundamental challenge is that models are often unreliable due to overconfidence. In this paper, we estimate a model's reliability by measuring the agreement between its latent space, and the latent space of a foundation model. However, it is challenging to measure the agreement between two different latent spaces due to their incoherence, \eg, arbitrary rotations and different dimensionality. To overcome this incoherence issue, we design a neighborhood agreement measure between latent spaces and find that this agreement is surprisingly well-correlated with the reliability of a model's predictions. Further, we show that fusing neighborhood agreement into a model's predictive confidence in a post-hoc way significantly improves its reliability. Theoretical analysis and extensive experiments on failure detection across various datasets verify the effectiveness of our method on both in-distribution and out-of-distribution settings.

Some fractals -- for instance those associated with the Mandelbrot and quadratic Julia sets -- are computed by iterating a function, and identifying the boundary between hyperparameters for which the resulting series diverges or remains bounded. Neural network training similarly involves iterating an update function (e.g. repeated steps of gradient descent), can result in convergent or divergent behavior, and can be extremely sensitive to small changes in hyperparameters. Motivated by these similarities, we experimentally examine the boundary between neural network hyperparameters that lead to stable and divergent training. We find that this boundary is fractal over more than ten decades of scale in all tested configurations.

A self-evolving agent retires its bad skills by watching them fail, so what happens when the judge cannot see the failures? Skill retirement is the structural constraint that keeps a growing library from drifting below the no-skill baseline, but its guarantee assumes an unbiased reward, which is false for the LLM judges that reference-free tasks force upon us. We show that a biased judge does not merely add noise; it silently switches off the curator. We make this precise with a corrupted-reward analysis and, isolating the causal channel by injecting corruption on top of a deterministic reward, a behavioral study on a reference-free report-writing testbed with a code-generation cross-check. Symmetric noise leaves retirement intact, but false-pass bias (failures slipping through as passes) disables contribution-based retirement past a sharp threshold that no amount of data can cross. Separating genuine retirement from cap-eviction churn shows this mechanism failure is universal, holding across domains and failure rates and sparing only near-zero-false-pass, verifier-like graders. The downstream outcome, though, is regime-dependent: eval quality degrades only where the same corruption also starves skill synthesis, and otherwise holds steady, so the disabled curator is silent, surfacing in no aggregate metric. The contribution is a behavioral safety result, not a performance one. A cheap defect-injection audit then tells an operator, before deployment, which side of the threshold their judge occupies.

Sycophancy in LLMs is documented across 70+ papers, but expert agreement on construct boundaries remains low (ICC=.184; Ye et al., 2026). The construct fragments because behavioral classification depends on which surface form is privileged. We adopt a materials-science framing: conversation as test specimen under load, LLM-model as material charge, pushback as progressive load, stance-flip as material failure. We characterize this failure across three loading cases (debate n=1000; false-presuppositions n=3400; ethical-setting n=3400; 10-17 material charges per case; 7800 specimens total) using 14 turn-level axis-measurements spanning velocity, damage accumulation, frame-drift, brittleness, and direction stability, plus three speaker-resolved axes from an independent pipeline. The measurements are Hooke-coupled (σ= E cdot varepsilon analog) and reproduce across loading cases with effects up to |r_{rb}| = 0.35 on debate; the sign structure adds a second pattern: the ethical-setting case inverts the velocity and accumulation blocks. Variance composition partitions into two profiles: debate is charge-dominated (brittle-fracture-like: the material grade decides), false-presuppositions and ethical-setting are topic-dominated (creep-like: the load decides); the ratios (2.03 vs 0.13/0.17) are estimator-dependent, for debate even in direction. Cross-judge reliability (GPT-4o vs Haiku 4.5) shows debate scoring is judge-robust (Cohen's κ= 0.88) while false-presupposition scoring is judge-sensitive (κ= 0.36) -- a caveat single-judge benchmarks must report. This is the methodological move Ye et al.'s diagnosis calls for: a multi-axis characterization that does not depend on which surface form of the construct one privileges.

The Boundary representation (B-rep) format is the de-facto shape representation in computer-aided design (CAD) to model solid and sheet objects. Recent approaches to generating CAD models have focused on learning sketch-and-extrude modeling sequences that are executed by a solid modeling kernel in postprocess to recover a B-rep. In this paper we present a new approach that enables learning from and synthesizing B-reps without the need for supervision through CAD modeling sequence data. Our method SolidGen, is an autoregressive neural network that models the B-rep directly by predicting the vertices, edges, and faces using Transformer-based and pointer neural networks. Key to achieving this is our Indexed Boundary Representation that references B-rep vertices, edges and faces in a well-defined hierarchy to capture the geometric and topological relations suitable for use with machine learning. SolidGen can be easily conditioned on contexts e.g., class labels, images, and voxels thanks to its probabilistic modeling of the B-rep distribution. We demonstrate qualitatively, quantitatively, and through perceptual evaluation by human subjects that SolidGen can produce high quality, realistic CAD models.

Consider a random uniform sample of n points in a compact region A of Euclidean d-space, d geq 2, with a smooth or (when d=2) polygonal boundary. Fix k bf N. Let T_{n,k} be the threshold r at which the geometric graph on these n vertices with distance parameter r becomes k-connected. We show that if d=2 then n (pi/|A|) T_{n,1}^2 - log n is asymptotically standard Gumbel. For (d,k) neq (2,1), it is n (theta_d/|A|) T_{n,k}^d - (2-2/d) log n - (4-2k-2/d) log log n that converges in distribution to a nondegenerate limit, where theta_d is the volume of the unit ball. The limit is Gumbel with scale parameter 2 except when (d,k)=(2,2) where the limit is two component extreme value distributed. The different cases reflect the fact that boundary effects are more more important in some cases than others. We also give similar results for the largest k-nearest neighbour link U_{n,k} in the sample, and show T_{n,k}=U_{n,k} with high probability. We provide estimates on rates of convergence and give similar results for Poisson samples in A. Finally, we give similar results even for non-uniform samples, with a less explicit sequence of centring constants.

Boundary point detection aims to outline the external contour structure of clusters and enhance the inter-cluster discrimination, thus bolstering the performance of the downstream classification and clustering tasks. However, existing boundary point detectors are sensitive to density heterogeneity or cannot identify boundary points in concave structures and high-dimensional manifolds. In this work, we propose a robust and efficient boundary point detection method based on Local Direction Dispersion (LoDD). The core of boundary point detection lies in measuring the difference between boundary points and internal points. It is a common observation that an internal point is surrounded by its neighbors in all directions, while the neighbors of a boundary point tend to be distributed only in a certain directional range. By considering this observation, we adopt density-independent K-Nearest Neighbors (KNN) method to determine neighboring points and design a centrality metric LoDD using the eigenvalues of the covariance matrix to depict the distribution uniformity of KNN. We also develop a grid-structure assumption of data distribution to determine the parameters adaptively. The effectiveness of LoDD is demonstrated on synthetic datasets, real-world benchmarks, and application of training set split for deep learning model and hole detection on point cloud data. The datasets and toolkit are available at: https://github.com/ZPGuiGroupWhu/lodd.

We study KV cache eviction under a shared globally capped decode-time harness. Seven policies (LRU, H2O, SnapKV, StreamingLLM, Ada-KV, QUEST, Random) share a prompt-boundary vulnerability: without structural protection, they collapse to near-zero quality on six pure-transformer models (F1leq0.064). Reserving 10\% of cache at each boundary recovers 69--90\% of the C{=}2{,}048 reference-ceiling quality on seven LongBench models at C{=}256 (13\% retention); a ten-model panel spans 68--98\%. An attention-mass pilot (Qwen2.5-3B, N{=}30) suggests why: the position-0 sink holds {sim}75% of prefix mass, while other boundary tokens sit near {sim}0.41{times} uniform expectation, so attention scorers retain the sink but still drop structurally critical tokens. With protection, simplified score-isolation variants are TOST-equivalent to LRU at K{=}32 (Δ{=}0.02); at K{=}8, attention policies pairwise converge yet beat LRU by 0.011--0.021 F1 across C{=}256 and C{=}512. Faithful Ada-KV/QUEST add {sim}0.03--0.04 F1 on Mistral-7B and Phi-3.5 beyond simplified variants. A NIAH-32K regime-transfer pilot on Qwen3-4B (decode vs.\ prefill, C{in}{512,2048}) shows near-identical protection lifts (ratio 0.99--1.00). At 64K, protection helps but recovery is modest; faithful per-head scoring matches full-cache ceiling on Gemma-3-4B at 6.3\% retention only when the model already supports strong 64K retrieval without eviction. Overall: protection dominates; scoring differences are secondary once boundaries are guarded; per-head allocation gives a further modest gain.

Using fault-tolerant constructions, computations performed with unreliable components can simulate their noiseless counterparts though the introduction of a modest amount of redundancy. Given the modest overhead required to achieve fault-tolerance, and the fact that increasing the reliability of basic components often comes at a cost, are there situations where fault-tolerance may be more economical? We present a general framework to account for this overhead cost in order to effectively compare fault-tolerant to non-fault-tolerant approaches for computation, in the limit of small logical error rates. Using this detailed accounting, we determine explicit boundaries at which fault-tolerant designs become more efficient than designs that achieve comparable reliability through direct consumption of resources. We find that the fault-tolerant construction is always preferred in the limit of high reliability in cases where the resources required to construct a basic unit grows faster than log(1 / epsilon) asymptotically for small epsilon.

Agentic reinforcement learning (RL) has proven effective for training LLM-based agents with external tool-use capabilities. However, we identify that agentic RL training induces increasing redundant tool calls and blurs the model's intrinsic knowledge boundary, where the model fails to distinguish when tools are needed versus when parametric knowledge suffices. Existing solutions based on reward shaping create coarse-grained optimization targets that tend to incentivize indiscriminate tool-call suppression, leading to reward hacking. In this paper, we propose AKBE (Agentic Knowledge Boundary Enhancement), an on-policy method that dynamically probes the model's intrinsic knowledge boundary through dual-path (with-tool and no-tool) rollouts during training. We define the knowledge boundary as the per-instance determination of whether tools are required and the minimum tool calls necessary. By comparing correctness across paths, AKBE categorizes trajectories and constructs targeted supervisory signals that guide efficient tool-use patterns for each question. These signals are integrated seamlessly into the agentic RL training loop. Experiments on seven QA benchmarks demonstrate that AKBE improves task accuracy by +1.85 on average and reduces tool calls by 18% over standard agentic RL, yielding 25% higher tool productivity without any accuracy-efficiency trade-off. Further analysis suggests its plug-and-play compatibility across different RL algorithms and the mechanism of each signal category. Our code is available at https://github.com/CuSO4-Chen/AKBE.

Every generative model for crystalline materials harbors a critical structure size beyond which its outputs quietly become unreliable -- we call this the extrapolation frontier. Despite its direct consequences for nanomaterial design, this frontier has never been systematically measured. We introduce RADII, a radius-resolved benchmark of {sim}75,000 nanoparticle structures (55-11,298 atoms) that treats radius as a continuous scaling knob to trace generation quality from in-distribution to out-of-distribution regimes under leakage-free splits. RADII provides frontier-specific diagnostics: per-radius error profiles pinpoint each architecture's scaling ceiling, surface-interior decomposition tests whether failures originate at boundaries or in bulk, and cross-metric failure sequencing reveals which aspect of structural fidelity breaks first. Benchmarking five state-of-the-art architectures, we find that: (i) all models degrade by {sim}13% in global positional error beyond training radii, yet local bond fidelity diverges wildly across architectures -- from near-zero to over 2times collapse; (ii) no two architectures share the same failure sequence, revealing the frontier as a multi-dimensional surface shaped by model family; and (iii) well-behaved models obey a power-law scaling exponent αapprox 1/3 whose in-distribution fit accurately predicts out-of-distribution error, making their frontiers quantitatively forecastable. These findings establish output scale as a first-class evaluation axis for geometric generative models. The dataset and code are available at https://github.com/KurbanIntelligenceLab/RADII.

The dynamics of materials failure is one of the most critical phenomena in a range of scientific and engineering fields, from healthcare to structural materials to transportation. In this paper we propose a specially designed deep neural network, DyFraNet, which can predict dynamic fracture behaviors by identifying a complete history of fracture propagation - from cracking onset, as a crack grows through the material, modeled as a series of frames evolving over time and dependent on each other. Furthermore, this model can not only forecast future fracture processes but also backcast to elucidate the past fracture history. In this scenario, once provided with the outcome of a fracture event, the model will elucidate past events that led to this state and will predict the future evolution of the failure process. By comparing the predicted results with atomistic-level simulations and theory, we show that DyFraNet can capture dynamic fracture mechanics by accurately predicting how cracks develop over time, including measures such as the crack speed, as well as when cracks become unstable. We use GradCAM to interpret how DyFraNet perceives the relationship between geometric conditions and fracture dynamics and we find DyFraNet pays special attention to the areas around crack tips, which have a critical influence in the early stage of fracture propagation. In later stages, the model pays increased attention to the existing or newly formed damage distribution in the material. The proposed approach offers significant potential to accelerate the exploration of the dynamics in material design against fracture failures and can be beneficially adapted for all kinds of dynamical engineering problems.

Agentic LLM coding tools compress long session histories into compaction summaries that subsequent sessions inherit as ground truth. This paper documents a failure mode in Claude Code where partial standard output from timed-out commands (exit code 143) is recorded in compaction summaries as confirmed results, propagating false positives across sessions and model versions without re-verification. The underlying mechanism is a conflation of observation and persistence, where information that appeared in the terminal is treated as equivalent to information written to durable storage. This finding extends the analysis of LLM self-evaluation failures reported in prior work on non-determinism in LLM-as-judge grading by showing that agentic tools exhibit analogous reliability deficits when reporting on their own operational outcomes. The failure has direct implications for any workflow that relies on agentic session continuity for data processing, scientific computation, or multi-step automation.

The decay of metastable 'false vacuum' states via bubble nucleation plays a crucial role in many cosmological scenarios. Cold-atom analog experiments will soon provide the first empirical probes of this process, with potentially far-reaching implications for early-Universe cosmology and high-energy physics. However, an inevitable difference between these analog systems and the early Universe is that the former have a boundary. We show, using a combination of Euclidean calculations and real-time lattice simulations, that these boundaries generically cause rapid bubble nucleation on the edge of the experiment, obscuring the bulk nucleation that is relevant for cosmology. We demonstrate that implementing a high-density 'trench' region at the boundary completely eliminates this problem, and recovers the desired cosmological behavior. Our findings are relevant for ongoing efforts to probe vacuum decay in the laboratory, providing a practical solution to a key experimental obstacle.

We develop and counterfactually evaluate a resolution-aware risk-design framework (PIRAP) for perpetual futures whose underlying tracks a single binary prediction-market probability through resolution. The framework specifies six components: an index estimator combining mid-price, depth-weighted mid, and time-decayed VWAP; jump-aware tiered margin sized against bounded-event terminal-collapse magnitude; leverage compression schedule contracting toward resolution; resolution-aware funding rule with boundary-aware correction; a multi-stage halt protocol; and an eligibility framework. Two formal non-portability propositions establish that standard basis-only funding paired with continuous-vol static margin fails on bounded-event underlyings. Empirical evaluation uses Polymarket's PMXT v2 archive for 2026-04-21 to 2026-04-27 (13,298-market analysis sample passing adequacy gates from 61,087 ingested; 13,115 resolved within the empirical window for E3). E1 evaluates two pre-registered stylized facts; E2 conducts counterfactual replay across three engine configurations; E3 isolates the resolution-zone protocol's contribution. Results are mixed. Five pre-registered floors: stylized-fact floors (boundary depth asymmetry, terminal-jump magnitude) PASS; welfare-side directional floors (final-hour liquidation -6%, drawdown -5.1% pooled, median PnL +14%) two FAIL one PASS; E3 mechanic floors (final-hour liquidation -80% by halt construction PASS; bad-debt frequency +2.4% FAIL). Three of five materiality floors fail: the framework as specified does not validate deployment, but the empirical record establishes a halt-versus-margin scope distinction (halt addresses execution-channel risk; terminal-jump bad-debt remains margin-side) and documents a pre-emption trade-off constraining the dynamic-margin component. The paper concludes with structural recommendations and explicit non-deployable status.

Reinforcement learning holds great promise for improving robot policies beyond the limits of imitation learning. However, its practical adoption remains bottlenecked by the lack of reliable vision-language reward models that provide dense and informative feedback. Two key challenges remain: acquiring diverse failure data at scale and obtaining fine-grained reward signals beyond sparse trajectory-level success labels. Collecting failure trajectories typically requires laborious human effort, while pseudo-failures constructed by relabeling successful demonstrations fail to capture the diverse physical failure modes that arise during robot execution. Meanwhile, existing reward models often predict sparse binary or trajectory-level rewards, which provide limited guidance for efficient policy optimization. We introduce DenseReward, a dense robotic reward model that addresses both challenges. To train DenseReward, we develop an automated failure data generation pipeline that synthesizes physically realistic failure trajectories in simulation without human labeling, covering diverse failure modes such as collisions, missed grasps, object drops, and recovery behaviors. DenseReward predicts dense frame-level reward scores from visual observations and language instructions, enabling fine-grained estimation of task progress throughout an episode. Experiments show that DenseReward outperforms general-purpose VLMs and existing robotic reward models in dense reward prediction across both simulated and real-world manipulation. We further demonstrate that DenseReward provides effective reward guidance for downstream model predictive control and reinforcement learning. We release the dataset, trained reward models, and evaluation suite to support the development of failure-aware dense reward modeling for robot learning.

A robot's flash endurance is a non-renewable stock: every persisted write spends one of a few thousand program/erase cycles and never refills, yet no fielded robot memory system prices which memories are worth an erase cycle. We treat embodied memory as depreciating capital and price that stock with a single endurance shadow price η, which makes cost-minimizing placement across a RAM / on-board NVM / cloud hierarchy a threshold in a wear-augmented per-byte index. The index is cost-optimal whatever the sign of the value-write association χ; only when χ> 0 does the optimum turn non-monotone, sending a robot's most valuable memories off its flash. The pivot is thus empirical, and we measure χ on real robot logs at a pre-specified gate: its sign is a property of the deployment regime -- positive on recurrent long-horizon manipulation (hatχ approx +1.0 times 10^{-3}, replicated at full power), null on a shorter-horizon suite, and negative on non-recurrent teleoperation. Two boundaries scope the result. The endurance budget is dormant on premium 3,000-P/E TLC at datasheet prices and binding on the commodity QLC/eMMC (sim1,000 P/E) that cheaper edge robots run. And where it binds, a learned wear-aware controller only ties price-based routing on task value, because realized value is tier-invariant across RAM, NVM, and cloud: the rent governs device lifetime and cost, not task performance. Whether wear-aware placement improves task value remains open -- χ is measured against a value proxy, and the non-monotone optimum, while proven, is not yet observed in data.

Multi-Agent Reinforcement Learning (MARL) is increasingly deployed in safety-critical domains, yet methods for interpretable failure detection and attribution remain underdeveloped. We introduce a two-stage gradient-based framework that provides interpretable diagnostics for three critical failure analysis tasks: (1) detecting the true initial failure source (Patient-0); (2) validating why non-attacked agents may be flagged first due to domino effects; and (3) tracing how failures propagate through learned coordination pathways. Stage 1 performs interpretable per-agent failure detection via Taylor-remainder analysis of policy-gradient costs, declaring an initial Patient-0 candidate at the first threshold crossing. Stage 2 provides validation through geometric analysis of critic derivatives-first-order sensitivity and directional second-order curvature aggregated over causal windows to construct interpretable contagion graphs. This approach explains "downstream-first" detection anomalies by revealing pathways that amplify upstream deviations. Evaluated across 500 episodes in Simple Spread (3 and 5 agents) and 100 episodes in StarCraft II using MADDPG and HATRPO, our method achieves 88.2-99.4% Patient-0 detection accuracy while providing interpretable geometric evidence for detection decisions. By moving beyond black-box detection to interpretable gradient-level forensics, this framework offers practical tools for diagnosing cascading failures in safety-critical MARL systems.

Enterprise large language model (LLM) applications often begin as prototypes whose behavior is carried by prompts and retrieval context. Productization adds requirements for source boundaries, entity routing, answer contracts, and reproducible traces. We present a harness-engineering approach that reconstructs this pattern into a traceable, auditable LLM-agent architecture: deterministic behavior moves into code, manifests, schemas, and validation artifacts around a replaceable composition boundary, while source-backed claims remain the authority for runtime answers. We instantiate it on a public-data slice of five Korean corporate groups (25 listed companies) and evaluate three research questions. (1) The harness preserves its source-grounding, entity-routing, trace, output-hygiene, and recommendation-language contracts across the fixed validation scenarios; a fault-injection control confirms the validators flag deliberately broken contracts. (2) The checks the harness enforces held under model substitution: across three hosted models, they passed on all 270 composition-boundary runs; failures were confined to the model-composed side and were caught and recorded. (3) The code-owned guarantees are load-bearing, not reproducible by prompting alone: holding the model fixed and varying only the enforcement layer, prompt instructions alone let recommendation-language and internal-trace-leakage violations reach the reader, which the harness blocks entirely. A bolt-on external guardrail prevents such violations too but over-refuses, dropping utility to 88/120 where the harness preserves full utility (120/120); in this ablation, only code-owned enforcement preserves both safety and utility. The result is a reusable engineering pattern for turning exploratory prototypes into auditable applications with versioned source, control, and validation artifacts.

Training LLMs on decentralized and wimpy computation nodes, e.g., multiple on-spot instances, lowers the training cost and enables model democratization. The inevitable challenge here is the churn of nodes due to failures and the operator's scheduling policies, leading to losing a stage - a part of the model. The conventional approaches to recover from failures are to either use checkpointing, where periodically a copy of the entire model is sent to an additional storage, or redundant computation. These approaches yield significant communication and/or computation overhead even in non-failure cases and scale poorly in settings with large models. In this paper, we propose, CheckFree, an efficient recovery method where a failing stage is substituted by a weighted average of the closest neighboring stages. In contrast to the state of the art, CheckFree requires no additional computation or storage. However, because of the nature of averaging neighbouring stages, it can only recover failures of intermediate stages. We further extend our method to CheckFree+ with out-of-order pipeline execution to tolerate crashes of the first and last stages. Thanks to out-of-order pipelining, behaviour of those stages is mimicked by their neighboring ones, which allows CheckFree+ to recover them by simply copying the weights from the immediate neighbour. To be able to recover the (de)embedding layers, CheckFree+ copies those layers to the neighboring stages, which requires relatively small storage overhead. We extensively evaluate our method on LLaMa models of model sizes from 124M to 1.5B with varying failure frequencies. In the case of low and medium failure rates (5-10%), CheckFree and CheckFree+ outperform both checkpointing and redundant computation in terms of convergence in wall-clock time by over 12%. Both of our proposals can be run via our code available at: https://github.com/gensyn-ai/CheckFree.

Modern automobiles have evolved from just being mechanical machines to having full-fledged electronics systems that enhance vehicle dynamics and driver experience. However, these complex hardware and software systems, if not properly designed, can experience failures that can compromise the safety of the vehicle, its occupants, and the surrounding environment. For example, a system to activate the brakes to avoid a collision saves lives when it functions properly, but could lead to tragic outcomes if the brakes were applied in a way that's inconsistent with the design. Broadly speaking, the analysis performed to minimize such risks falls into a systems engineering domain called Functional Safety. In this paper, we present SafetyLens, a visual data analysis tool to assist engineers and analysts in analyzing automotive Functional Safety datasets. SafetyLens combines techniques including network exploration and visual comparison to help analysts perform domain-specific tasks. This paper presents the design study with domain experts that resulted in the design guidelines, the tool, and user feedback.

Large language models (LLMs) show inherent brittleness in their safety mechanisms, as evidenced by their susceptibility to jailbreaking and even non-malicious fine-tuning. This study explores this brittleness of safety alignment by leveraging pruning and low-rank modifications. We develop methods to identify critical regions that are vital for safety guardrails, and that are disentangled from utility-relevant regions at both the neuron and rank levels. Surprisingly, the isolated regions we find are sparse, comprising about 3% at the parameter level and 2.5% at the rank level. Removing these regions compromises safety without significantly impacting utility, corroborating the inherent brittleness of the model's safety mechanisms. Moreover, we show that LLMs remain vulnerable to low-cost fine-tuning attacks even when modifications to the safety-critical regions are restricted. These findings underscore the urgent need for more robust safety strategies in LLMs.

We present Boundary IoU (Intersection-over-Union), a new segmentation evaluation measure focused on boundary quality. We perform an extensive analysis across different error types and object sizes and show that Boundary IoU is significantly more sensitive than the standard Mask IoU measure to boundary errors for large objects and does not over-penalize errors on smaller objects. The new quality measure displays several desirable characteristics like symmetry w.r.t. prediction/ground truth pairs and balanced responsiveness across scales, which makes it more suitable for segmentation evaluation than other boundary-focused measures like Trimap IoU and F-measure. Based on Boundary IoU, we update the standard evaluation protocols for instance and panoptic segmentation tasks by proposing the Boundary AP (Average Precision) and Boundary PQ (Panoptic Quality) metrics, respectively. Our experiments show that the new evaluation metrics track boundary quality improvements that are generally overlooked by current Mask IoU-based evaluation metrics. We hope that the adoption of the new boundary-sensitive evaluation metrics will lead to rapid progress in segmentation methods that improve boundary quality.

We provide a theoretical framework to analyze the properties of frontal collisions of two growing interfaces considering different short range interactions between them. Due to their roughness, the collision events spread in time and form rough domain boundaries, which defines collision interfaces in time and space. We show that statistical properties of such interfaces depend on the kinetics of the growing interfaces before collision, but are independent of the details of their interaction and of their fluctuations during the collision. Those properties exhibit dynamic scaling with exponents related to the growth kinetics, but their distributions may be non-universal. These results are supported by simulations of lattice models with irreversible dynamics and local interactions. Relations to first passage processes are discussed and a possible application to grain boundary formation in two-dimensional materials is suggested.

A common assumption holds that enough observational and interventional data, given to a strong enough predictor, suffices. We report a failure mode that contradicts it. Across hundreds of structural causal models, on identified quantities a strong predictor and a Bayesian baseline both succeed, but on unidentified quantities (the couplings between counterfactual worlds) the predictor collapses to a point, on 28% of models to one no valid model can produce, while the truth is an admissible interval more data never narrows. The gap is structural: prediction cannot represent uncertainty over counterfactual couplings. We cast a world model as a single positive semidefinite coupling kernel K(T,T') over admissible worlds, whose diagonal is the ordinary posterior (what a predictor recovers) and whose off-diagonal is the cross-world coupling it cannot, which every counterfactual reads. The paper is the theory of that off-diagonal. It is real: two states with identical posteriors differ on a cross-world query, and the off-diagonal is the coupling that fixes counterfactuals. It can be bounded: positive semidefiniteness is partial-identifying information the marginals lack, and enforcing it bounds counterfactuals in polynomial time where the exact response-type program is intractable. Logical structure sharpens it: ontology axioms tighten the bound by up to a third, propagating to couplings they never touch. It can be acquired: targeted scars, constraints learned from encountered infeasibilities, close the gap several times faster than untargeted ones. Its full reconstruction is approximate counting of the admissible worlds, tractable below the Sly-Sun threshold and inapproximable above; we do not claim to beat the worst case.

Boundary Representation (BRep) is the standard format for Computer-Aided Design (CAD), yet reconstructing high-quality BReps from single-view images remains challenging due to the complexity of topological constraints and operation sequences. We present Img2CADSeq, a multi-stage pipeline that overcomes these limitations by encoding CAD sequences into a three-level hierarchical codebook. Guided by an importance prioritization, this strategy values profiles over details, compressing long sequences into a stable discrete latent space. To bridge the modality gap, we leverage a coarse-to-fine point cloud intermediate, aligning 2D visual features with 3D CAD sequences via contrastive learning to condition a VQ-Diffusion model. Supported by newly introduced CAD-220K and PrintCAD datasets, our approach ensures robust industrial domain adaptation. Extensive experiments demonstrate that Img2CADSeq significantly outperforms state-of-the-art methods, producing standard STEP files that can be directly used in commercial CAD software.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

When automated decision systems fail, organizations frequently discover that formally compliant governance infrastructure cannot reconstruct what happened or why. This paper synthesizes an operational governance evidence framework -- structural accountability collapse diagnostics, decision trace schemas, evidence sufficiency measurement, and label-free monitoring -- into an integrated chain and analytically assesses its transferability across four decision system architectures. The cross-architecture comparison reveals a governance coverage gradient: deterministic rule engines achieve full DES-property fillability, hybrid ML+rules systems achieve partial fillability, classical ML systems achieve only minimal fillability, and agentic AI systems encounter structural breaks. We introduce the cascade of uncertainty, showing how governance failures propagate through serial dependencies between framework layers. For agentic systems, we identify three structural breaks -- decision diffusion, evidence fragmentation, and responsibility ambiguity -- and propose corresponding analytical extensions. Four propositions formalize the gradient, cascade compounding, delegation-depth effects, and extension sufficiency, establishing boundary conditions for the framework's valid operating envelope.

Alignment tuning is meant to make harmful-request refusal robust, yet this safety behavior can be erased by a small set of benign fine-tuning examples. This is a deployment risk for open-weight models because a checkpoint can pass refusal tests at release time and later lose refusal under low-cost downstream fine-tuning. Prior work has established these refusal failures, but existing studies do not show how to detect this fragility in the aligned model itself before an attack or fine-tuning intervention is run. We introduce Skin-Deep, a geometric diagnostic that detects alignment fragility directly from the aligned model's hidden-state activations before such an intervention is run and compresses the layer-wise safety geometry into a single scalar, the Geometric Fragility Score (GFS). Applied to twenty-one instruction-tuned models spanning six alignment recipes and 3B--32B parameters, Skin-Deep reveals a recurring low-rank safety subspace across model families. Direction ablations show that removing directions in this subspace weakens harmful-request refusal, providing causal evidence that the recovered geometry underlies refusal behavior. Crucially, GFS identifies, before any fine-tuning, the initially safe model that retains the most refusal after small-scale LoRA fine-tuning. These results establish GFS as a practical pre-deployment diagnostic for flagging fragile refusal behavior without running an attack.

Fracture is one of the main causes of failure in engineering structures. Phase field methods coupled with adaptive mesh refinement (AMR) techniques have been widely used to model crack propagation due to their ease of implementation and scalability. However, phase field methods can still be computationally demanding making them unfeasible for high-throughput design applications. Machine learning (ML) models such as Graph Neural Networks (GNNs) have shown their ability to emulate complex dynamic problems with speed-ups orders of magnitude faster compared to high-fidelity simulators. In this work, we present a dynamic mesh-based GNN framework for emulating phase field simulations of crack propagation with AMR for different crack configurations. The developed framework - ADAPTive mesh-based graph neural network (ADAPT-GNN) - exploits the benefits of both ML methods and AMR by describing the graph representation at each time-step as the refined mesh itself. Using ADAPT-GNN, we predict the evolution of displacement fields and scalar damage field (or phase field) with high accuracy compared to conventional phase field fracture model. We also compute crack stress fields with high accuracy using the predicted displacements and phase field parameter. Finally, we observe speed up of 15-36x compared to serial execution of the phase field model.